Unique solutions for cleaning and disinfecting air, surfaces and wastewater.

Odor & Grease Control

Eliminating any odour in thee air and breakdown of grease and oil deposits in any larger kitchen or production company.

Mobile Air Cleaning

Mobile air cleaners for your home, car and business.


Disinfection with UV-C radiation.



Benefits of using Jimco Air Cleaning Units

JIMCO A/S has specialized in the reduction of grease and odor problems through the development of advanced patented UV-C & Ozone technology.​

This technology eliminates a number of environmental hazards generated by industrial and commercial processes.

Example one: Destruction of odor and grease produced by industrial and commercial fryers/deep fat fryers that can exhaust to atmosphere and deposit in the hood and duct systems.

Example two: Dramatic reduction of malodor and organic contamination from sewage, bio-gas and incinerating plants. Applications are numerous and most organic based environmental hazards can be eliminated using Jimco technology.


Benefits using JIMCO Air-cleaning units:

  • Tested and reliable equipment
  • Effective reduction of odors and VOC’s
  • No use of chemicals or fragrant oils
  • No use of filters or absorbents
  • No use of microbiology
  • No liquid effluent or harmful residues
  • A compact installation that efficiently utilizes space
  • Simple to retrofit into existing buildings
  • Instant start-up and shot down
  • Competitive investment cost
  • Low maintenance and operation cost

Eliminate the problems associated with high chimney stacks, incinerators/thermal oxidizers, biological filters/peat beds, chemical scrubbers, fragrant oil masking, etc. as they are not required when you use JIMCO technology.​

FLO-P Air Cleaning Units

For the reduction of grease and odor from industrial exhausts

For a number of years, JIMCO A/S has developed and manufactured air-cleaning systems specifically for the reduction of grease and aromatic compounds in exhaust air with high temperatures (frying, boiling and deep frying processes). JIMCO systems are based on UV-C & Ozone technology that results in the cold incineration of organic matter from a process called photolytic oxidation. The process leaves no harmful residues.​

FLO-K Air Cleaning Units

For the reduction of odor from industrial exhausts

Over the last two decades, JIMCO A/S has developed and manufactured air-cleaning systems specifically for the industry. JIMCO’s systems are based on UV-C & Ozone Technology. This method is based on photolytic oxidation whereby a cold incineration of organic matter occurs. The process leaves no harmful residues. FLO-K systems are manufactured and supplied for various tasks.

JIMCO Air-Cleaning System type FLO-K is used for a large number of different applications

– where the air temperature is less than 45OC. The FLO-K system does not require a secondary air to cool the primary air to be treated. The process is called photolytic oxidation, which means the contaminated air is subjected to a combination of UV-C light and ozone.

The contaminants in the air are oxidized or cold incinerated. Odors and organic particles contained in the air are reduced to an absolute minimum. The typical reduction in OU/m3 is about 90 – 98%.​

The reaction chamber of  JIMCO’s FLO-K system is made of acid proof stainless steel (316) and contains a number of JIMCO’s Photozonelamps™. These are dimensioned for the volume of air you wish to clean.

JIMCO’s FLO-K systems can be used in conjunction with automatic CIP cleaning systems. The CIP system is controlled from the PLC-controller to program the cleaning sequence to your requirements. JIMCO and CIP suppliers have jointly selected the best environmentally friendly detergents for the cleaning process.

JIMCO’s industrial systems are normally equipped with PLC-controllers incorporating modem links and alarm signals.

A newly developed product has made it possible to clean the air exhausting from smoking ovens very successfully. Experience and analyses have shown that a cleaning effect of approx. 95% can be achieved.

JIMCO’s FLO-K system can be combined with a water scrubber for applications with large ammonia content. Ammonia is easily washed out of the contaminated air. The air is washed before entering the UV-C reaction chamber.

There are numerous applications for the JIMCO’s FLO-K system, e.g. in:

  • Public sewage/wastewater plants
  • Pumping stations
  • Food processing plants
  • Grain and feedstuff factories
  • Stables and zoological gardens
  • Pharmaceutical and chemical production units
  • Biogas plants
  • Destruction plants

HS Purifier

The HS Purifier uses photolytic oxidation to purify hydrogen sulfide (H2S) in the air. When the amount of H2S is reduced significant in a pump well you will avoid neighbors complaining about odor and you will protect your electrical installations against the corrosive gas.​

The HS Purifier is connected to a 230 V power supply and is mounted vertical in an Ø110 PVC tube with the ventilator on top. The Ø110 tube ends in the pump well and the ozone will travel through the tube into the pump pit.

Oxygen in the atmospheric air is converted into ozone by using JIMCO’s special HS lamp. The ozone is blown to into the pump pit by a ventilator mounted on the HS Purifier. The ozone will react with hydrogen sulfide and the following chemical reaction occurs in pump well:

O₃ + H₂S -> SO₂ + H₂O -> SO₂²⁻ og SO₃²⁻​

This means that the hydrogen sulfide is oxidized into a sulfur compound and is therefore no longer dangerous or malodorous.

Advantages using the HS-Purifier:

  • ​Ozonation is 100% effective in converting
    ​H2S to sulfates
  • ​Reduces hydrogen sulfide effectively
  • ​Sterilizes the air
  • ​Odor reduction No complaining neighbors
  • ​Protecting electrical installations
  • ​Environmentally friendly purification
  • ​Disinfects – E-coli bacteria, Zars, Etc.
  • ​Easy to install
  • ​Low initial cost
  • ​Low operation and maintenance costs

Portable Air Purifier

JIMCO Air Purifier

Environmental air purification of your home no use of chemicals

JIMCO has specialized in producing various sizes of air purifier

Based on the unique UV-C technology.​​

MAC500 - Fresh air and the elimination of bacteria

JIMCO has specialized in combating odors by using patented UV-C and Ozone technology.

Improved indoor climate, improved work environment!

​A poor indoor climate in rooms which we occupy affects our quality of life and health negatively.

​Unpleasant odors can themselves create discomfort but indoor air pollution is also the source of headaches, respiratory problems, fatigue, and asthma. All these problems can affect people’s working ability and concentration.​


The technology behind MAC500 reduces absence due to illness!

A scientific study in Canada has proved the effect of UV-C technology in connection with indoor climate.

The study was based on a company‘s 771 employees and the result of this study was published in ”THE LANCET” Vol. 362 of 29.11.2003.

The results clearly showed a reduction of absence due to illness up to 40 % – and a daily increased productivity of up to 10 %.

MAC500 is applicable everywhere

• MAC500 is able to improve the indoor climate everywhere where people are present.

​• MAC500 reduces the number of bacteria, viruses and mold fungi and is therefore also suitable in bacteria loaded environments.

Odors can be difficult to remove

Even though a room is well ventilated, odor problems can be difficult to remove.

​• With MAC500 you can permanently solve any kind of odor problem and without the use of chemicals.

​• The odor will not return unless the source of the odor is still present.

Easy to install!

MAC500 must be installed high in the room – on a bookshelf, wall or ceiling.

Produced in:

4 different colors: White –Stainless steel –Black​–Grey

OZ1000 & OZ2000

OZ1000 eliminates mold & fungi up to 99.9%.

Not only removes the odor from the air, but also the odor that may remain in fabrics.

Poor indoor climate

The bad smell may itself cause discomfort, but indoor air pollution is also the source of headaches, respiratory problems, fatigue, muscle tension, asthma, allergy, dry mucous membrane and eye irritation. All these problems affect people’s working ability and concentration.

Odors can be hard to eliminate

Even in a well-ventilated room, it may be difficult to remove nuisance odors. With OZ1000 & OZ2000 you can permanently solve any kind of odor problems without using chemicals. Unless the source of the odor is still present, the odor will not return.

Easy to install

OZ1000 & OZ2000 should be installed high in the room – on a bookshelf, wall or ceiling.


People or animals must not be present in the room or area being treated by OZ1000 & OZ2000.​


  • Clean physical process without chemicals
  • Advantageous compared to filter techniques
  • No negative environmental impact
  • Minimum power consumption
  • High operational security
  • Demands minimum maintenance
  • Easy to install
  • Small investment
  • Easy to move

The OZ1000 & OZ2000 are both a good investment…

The poor indoor climate in rooms where people are present affects their quality of life and health negatively. It may be malodor from garbage, mold and fungi, cigarettes, industrial processes etc.

It is an investment in better personal well-being, better efficiency, increased job satisfaction and less absence due to illness.​

Surface Disinfection

Surface Disinfection

Due to increasingly higher hygiene demands in the food processing industry etc., the use of UV-C light to eliminate microorganisms e.g. bacteria, fungi, and viruses, is becoming more and more commonly used.

Using UV-C light to eliminate microorganisms in the air is a technique that has been known for decades. UV-C light reduces the total amount of microorganisms in the room by breaking the DNA bonds in the organisms.

Using UV-C Technology, JIMCO is specialized in the elimination of microorganisms and odors.

A minor contamination with microbiology may result in a faulty commodity – in consequence, it can be an expensive affair for the company. To avoid this, a steadily increasing number of companies decide to sterilize/disinfect the process air with UV-C light.

Depending on the calculated UV-C dosage, a kill rate of 99.9% of all microorganisms may be achieved.

Together with the PLC-control, special UV-C sensors developed by JIMCO A/S, ensure that the UV-C light is 100% effective.​

FLO-D Surface Disinfection

FLO-D gives an automatic disinfection of surfaces​

Efficient disinfection – without manual procedures, chemicals or water

With the introduction of the UV-C-based disinfection of surfaces, we now add yet another field of application to our patented UV-C technology, which has been awarded the EU Environmental prize and which since 1993 has been used in self-produced air cleaners – systems which are used for removing obnoxious smells, improving the indoor climate as well as reducing the danger of fire and infection hazards.

Now it is possible to disinfect surfaces, which would normally require a manual treatment, involving a large number of advantages for the operating economy, the environment as well as the work environment.​

Why choose an automatic disinfection of surfaces?​

  • You will avoid time-consuming manual disinfection with water and chemicals
  • You will save liters of water by the thousand as well as energy for heating and drying
  • You will disinfect more efficiently in corners, chinks and ventilation ducts, cooling surfaces.
  • You will avoid strong chemicals, which have an impact on the environment and work environment
  • Avoid an environmentally harmful release of chlorinated wastewater
  • Fast payback

The disinfection module can with advantage be used with Jimco´s UV-C air sterilization solutions that are typically installed in connection with existing ventilation systems. In this way, the customer will have a total solution, which cleans the air in the production rooms during working hours – and disinfects all surfaces after closing time, when the daily cleaning of machines and surfaces is complete and there are no longer any people in the room.​

The start-up can take place automatically via a foregoing programming, e.g. when a given process is ended, or manually by pressing a button when the last person leaves the room. Besides production rooms, the solution can with great advantage be applied in i.a. cooling and storage rooms, laboratories as well as in the health sector for the disinfection of bed units, etc.

In most environments, the system will provide savings on manpower, water, and heat in amounts that are so high that the repayment period will only last approximately one year.

Very positive results – of tests as well as practical use

Prior to the introduction of our solutions for UV-C & Ozone-based disinfection, we have for some time conducted full-scale tests in various companies in co-operation with DTU (Technical University of Denmark) and The National Institute for Aquatic Resources. The results were very positive.

Furthermore, various tests carried out in co-operation with The South Danish university have shown that concentrations of for instance listeria and salmonella bacteria can be almost completely removed by means of our technology and within only one hour a day.

Hygiene that is on a level with or better than traditional disinfection

​At the fish factory Vega Salmon A/S, in Esbjerg DK, JIMCO’s system for UV-C & Ozone-based disinfection has been installed in the production. Tests from the factory show that the total bacterial concentration after a UV-C & Ozone-based disinfection is better/lower than after a traditional disinfection. At the same time, the concentration of fungal spores is reduced.​

This goes to prove that saving tons of water and chemicals has no hygienic consequences.​

Commercial Kitchen

Odor, grease and fat reduction.

The original air conditioning systems manufactured by JIMCO A / S combine two important features for any commercial kitchen or manufacturing company

As the plants remove the odor from the air, they also break down the grease and oil deposited in the ducts.

Practically, JIMCO A / S offers an easy and effective way to treat air, both inside and outside buildings. At the same time, the reduced air pollution decreases the risk of fire by up to 95%.

JIMCO A / S is constantly developing new products to meet the demands of the time. For example, the increased focus on the importance of a good indoor climate has inspired JIMCO A / S to develop a special air sterilization system that can be used everywhere – in kindergartens and schools, in museums, hospitals, and nursing homes. In other words, anywhere that clean air and bacterial degradation are of great importance.

Hood without JIMCO Technology – Not cleaned for 6 months (on the left)

Hood with JIMCO Technology – Not cleaned for 6 months (on the right)​

Inspection Hatch without JIMCO Technology – Not cleaned for 6 months (on the left)

Inspection Hatch with JIMCO Technology – Not cleaned for 38 months (on the right)​

Duct without JIMCO Technology (on the left)

Duct with JIMCO Technology (on the right)​

Want to Discuss Catering Equipment Leasing Options with our Equipment Specialists?

Back to Top